IPMX H.264/H.265 decoder for HDMI displays
PlexusAV P-AVN-2D
The P-AVN-2D is a dedicated IPMX endpoint that receives H.264 or H.265 IP video streams and outputs them to an HDMI display with low latency. It is aimed at AV-over-IP installations in classrooms, conference rooms, digital signage networks and live production, where a networked source has to reach one or many screens without a local media player. Built on open IPMX standards, it is designed to work with other standards-based devices rather than a single vendor's ecosystem, and it is intended for 1 Gbps networks where bandwidth needs to be kept low.

Open IPMX Standard Avoids Vendor Lock-In
The P-AVN-2D is built on the IPMX protocol family and lists the IPMX technical standards TR-10-1, TR-10-3, TR-10-5, TR-10-7, TR-10-8 and TR-10-11, with NMOS IS-04 and IS-05 support. For an integrator this means the decoder is meant to sit alongside other standards-based AV-over-IP equipment instead of requiring one manufacturer's whole ecosystem. For the end user, that translates into a system that can be expanded or re-sourced later without replacing every endpoint. Because the decoder is specified against published standards, the same network design can host sources and displays from different suppliers, which is useful in multi-building campuses and corporate sites that grow over time.

Single-Cable Install with PoE+ and Dual Ports
The decoder has two RJ-45 gigabit Ethernet ports, and Ethernet 1 supports PoE+ (IEEE 802.3at Type 2 Class 4) so that one cable carries both power and network traffic. The manufacturer describes the second port as providing network redundancy for uninterrupted playback. Practically, this means the unit can be placed behind a display or in a ceiling or cabinet where a power outlet is inconvenient, and it needs only one data drop. The datasheet recommends CAT6 or CAT6A shielded cable, which is worth specifying on a new install to keep the 1 Gbps link clean. For the end user the result is fewer power bricks and cables to fail or get disturbed during daily use.
Dual gigabit ports. PoE+ power. 4K60 HDMI out.
3-year limited warranty as standard · IPMX-based open standards

4K60 HDMI 2.1 Output with HDCP 2.3 and EDID Control
The HDMI 2.1 output decodes to 3840x2160 at 60, 50, 30 or 25 fps and supports HDCP 2.3, CEC and EDID control with Auto, Preset or Manual modes. Video scaling can upscale to 4K, and the aspect ratio can be kept or the picture stretched to fill the screen. HDR10 pass-through is listed alongside SDR, and the colour gamut covers BT.2020, BT.709 and BT.601. EDID control matters in practice because the decoder can present a suitable mode to the display, which reduces the blank screens and flicker that often appear when a new source is switched in. For the end user this means a stable picture on a commercial display from the first power-up, while still allowing a fixed EDID to be locked in where a site needs it.

Low-Latency H.264/H.265 Decoding on 1 Gbps Networks
The P-AVN-2D decodes H.264 (MPEG-4) and H.265 (HEVC) streams, so the network carries compressed video rather than uncompressed signals. That is what makes it workable on standard 1 Gbps infrastructure, where uncompressed transport would be too heavy. The product is aimed at bandwidth-constrained sites and at live applications such as on-site monitoring and production review. The manufacturer's own material refers to low end-to-end latency at moderate bitrates when paired with its P-AVN-2E encoder; the datasheet itself lists the supported codecs and stream formats rather than a latency figure. For the end user this means a live feed can reach a display across the existing LAN with little delay, which suits monitoring and presentation use more than frame-accurate broadcast work.

Remote Control via Web UI, REST API and Visual Array
The decoder offers a browser-based HTTPS web interface, GraphQL and REST APIs, and supports NMOS IS-04, IS-05 and BCP-003. The datasheet also states that it can be controlled and managed by the PlexusAV Visual Array, which is the manufacturer's central management system. An integrator can therefore configure and monitor units from one place or script them into an existing network management tool. For the end user, a unit that can be reconfigured or checked remotely reduces the need for technician visits to a wall-mounted screen, which matters in public venues and multi-site deployments. The REST API is marked with an asterisk in the datasheet, so its exact scope should be confirmed with the manufacturer before a project depends on it.

USB-C Keyboard, Mouse and Webcam Extension
Two front-panel USB-C ports (USB 2.0) let a keyboard, mouse or UVC webcam be extended across the IP network, with up to 5 W of power delivery on the ports. The datasheet is explicit that the ports cannot charge a laptop or carry video input, so they are for peripherals only. In a meeting room this allows the user to reach an interactive presentation or a camera from the decoder's location, instead of running extra cabling to the display. For the end user the benefit is a simpler room with fewer visible cables and a local set of peripherals that works from the same network as the video.

AES67, Linear PCM and Optional Dante Audio
The decoder supports Linear PCM, AAC-LC and AAC-Main audio along with audio pass-through, with AES67 listed in the manufacturer's overview and the Japanese datasheet, and sample rates of 44.1 and 48 kHz. Dante stereo input and output is available only as an optional license ordered at the time of purchase, so it cannot be added later according to the datasheet's wording. For an integrator this matters when a project needs Dante in the same network as the AV streams. For the end user it means the sound can follow the picture from a networked source to the display system without a separate audio path, provided the correct audio option is specified.

Compact Body with Rack and Wall Mounting Options
The chassis measures 162 x 143 x 26 mm and weighs 1.3 lb (0.6 kg), and the datasheet describes it as small enough to sit behind a TV, in a control room, or in a rack or wall mount. Optional accessories include a 1RU rack kit for three units, a 4RU kit for fourteen units, and a table or wall bracket. Typical operating power is 15 W, or 11.4 W in eco mode on firmware 1.4, with an acoustic noise rating of 33 dBA. For the end user this means the decoder can be hidden out of sight in a display installation and runs at a low noise level, which suits offices and teaching spaces where a fan would be audible.