1G IPMX JPEG XS transceiver with Dante audio
PlexusAV P-AVN-4
The P-AVN-4 is an AV-over-IP transceiver for integrators who need to move HDMI and USB-C video across an existing Ethernet infrastructure. One unit can be set up to encode a local source or decode an incoming IPMX stream, which makes it suitable for matrix-style routing, digital signage distribution, meeting rooms, lecture halls and live production. Its main benefit is that it brings low-latency 4K-class video onto standard 1 Gigabit networks using open IPMX standards, so customers are not tied to a single manufacturer's ecosystem when they expand a system later.

Open IPMX Standard Avoids Vendor Lock-In
IPMX is an open AV-over-IP standard, and the P-AVN-4 is built on its protocols. The datasheet lists the TR-10 parts it covers, plus NMOS IS-04 and IS-05 support. For an integrator this means the transceiver can be combined with IPMX devices from other manufacturers, rather than tying the whole signal chain to one vendor's hardware. For the end user, a system can grow with a new source or display from another brand without a forced replacement of every endpoint. Interoperability with a specific third-party device should still be confirmed against the firmware the customer runs, because the datasheet describes some capabilities as planned updates.

Up to 4K60 Low-Latency Video on 1G Networks
The P-AVN-4 compresses HDMI or USB-C video with JPEG XS, including the Flawless Imaging Profile, and sends it over ordinary Gigabit Ethernet. The datasheet gives a configurable bitrate of 200 to 800 Mbps and describes the compression as lite, aimed at near-instant transmission. For a venue this means 4K60 sources can be distributed on existing switches without a 10G backbone. End users see content with very little delay, which matters for live production, e-sports and interactive meeting content. The FIP profile is positioned by PlexusAV for sharper detail in signage and text-heavy material. The datasheet marks several lower PC resolutions as supported only in an upcoming release, so required resolutions should be checked before specifying.
Three gigabit ports. One PoE+ cable. Encoder or decoder in one box.
3-year limited warranty · Open IPMX standard · Dante and AES67 audio

Three Gigabit Ports with Single-Cable PoE+
The unit has two RJ-45 ports and one SFP cage. Ethernet 1 is the PoE+ port (IEEE 802.3at Type 2 Class 4, 25.5 W), so one cable can deliver both power and data. The SFP accepts 1G copper or 850 nm multimode or 1310 nm single-mode modules, which are sold separately. Ethernet 2 is a standard RJ-45 port without PoE, useful for separating traffic onto another network. For the installer, the uplink choice between copper and fiber changes the cabling plan without changing the unit. For the end user, a display-mounted transceiver needs only one network cable, which cuts visible wiring and removes a separate power adapter as a failure point.

One Hardware Platform for Encoder and Decoder Roles
The same P-AVN-4 hardware can be configured as an encoder or a decoder. In encoder mode it takes an HDMI input and a USB-C video input and offers an HDMI loop-out for monitoring the source before it is streamed. In decoder mode it provides an HDMI output with CEC and EDID save and download. For a reseller this reduces the number of models to stock and allows a spare unit to be reassigned on site. For the end user, a failed endpoint can be replaced by a spare that is reconfigured to the same role, rather than by a different product that may not match the rest of the system.

Built-In Web UI, API and Central Management
Each unit includes a web interface for configuration and control, and an HTTPS API with GraphQL support for third-party integration. NMOS IS-04, IS-05 and BCP-003 are supported, and PlexusAV's Visual Array can manage transceivers centrally. A small meeting room can be commissioned with the built-in interface alone, without extra software. Larger estates benefit from central management and NMOS-based routing, which reduces the number of site visits needed for changes. Customers see simpler source switching and fewer manual adjustments, although a multi-unit system still depends on the management layer being set up correctly from the start.

Video Scaling and 3x3 Videowall Processing
The video scaler handles resolution upscaling and downscaling, frame-rate conversion, colour-mode conversion and aspect-ratio adjustment, and the datasheet lists videowall processing up to 3x3. Scaling at the endpoint means mixed-resolution sources can be normalised before they reach each display. The vendor states that additional videowall templates are available on request, so layouts larger than 3x3 need confirming with the manufacturer. For the end user, a multi-panel wall can present a clean picture even when the source does not match each panel's native resolution, which reduces setup problems and visibly mismatched screens.

Compact Chassis for Racks, Shelves and Behind Displays
At 162 x 143 x 26 mm and 0.6 kg, the unit is small enough to mount behind a display or in a control room. The P-AVN-M-1RU shelf holds three units in one rack unit, the P-AVN-M-4RU-KIT holds 14, and the P-AVN-M-WAL bracket mounts units to a table or wall. For the integrator this gives dense rack builds with a sold-separately mounting kit matched to the install. For the end user, the transceiver can be tucked out of sight, which reduces visible equipment in meeting rooms, lobbies and retail back-of-house areas.