Collections:

Skip to product information
1 of 3

944E-30

Active 9 m (30 ft) in-wall rated HDMI cable with Snug-Tite connectors, built for concealed source-to-display runs in permanent AV installations.

  • 4K60 4:4:4 video with HDR at up to 18 Gbps bandwidth
  • Snug-Tite grip keeps both connectors securely seated
  • Active chipset supports the 30 ft source-to-display run
  • UL CL2 in-wall rated jacket for concealed installations
  • 32-channel audio, ARC and CEC control over one cable
  • 1-year warranty on SCP-branded active HDMI cables
  • SKU:810070019426
  • GTIN:810070019426
  • MPN:944E-30

You need to login to view the price.

View full details

Active 4K60 in-wall HDMI cable, 30 ft

SCP 944E-30

The SCP 944E-30 is a 9 m (30 ft) active HDMI cable from the 944E Custom Install Series, designed for AV integrators who need a permanent, concealed connection between a source and a display. It targets home theatre rooms, meeting spaces and commercial installations where the cable is routed through walls or conduit and must not be replaced later. Its active connector design and locking connector grip are aimed at reducing signal dropouts and service visits once the cable is in place. The cable is a practical choice for fixed-position sources such as set-top boxes, media players, laptops and games consoles connected to a TV or projector.

Snug-Tite Grip Keeps Connections Secure

Snug-Tite Grip Keeps Connections Secure

The Snug-Tite grip is SCP's connector retention system, rated at 12 lbs of grip force and intended to hold its grip after repeated connects and disconnects. HDMI links that work loose cause intermittent picture or audio faults that are difficult to diagnose remotely. For the end user, a connector that stays seated at the back of a wall-mounted TV or a fixed media player means fewer unexplained blackouts and fewer call-outs after handover. The grip is a plain mechanical feature, so it does not need any clips or screw locks on the connector, which keeps the plug compact on crowded multi-port device panels.

4K60 4:4:4 Video With HDR Headroom

4K60 4:4:4 Video With HDR Headroom

The cable is specified for 4096 x 2160 at 60 Hz with 4:4:4 chroma sampling, an 18 Gbps maximum bandwidth and a 600 MHz maximum clock rate, and it supports HDR. Full 4:4:4 sampling keeps colour detail on text and graphics that 4:2:0 compression would soften, which matters for signage-style content and computer sources on a TV. The 18 Gbps ceiling gives headroom for current UHD sources, so an end user is less likely to need recabling when a higher-bandwidth source is added later. The datasheet's 4:2:0 and lower bandwidth tiers mean the cable also works with older or lower-rate sources.

Active 30 ft run. 4K60 4:4:4. In-wall rated.

Snug-Tite grip rated 12 lbs · 1-year warranty on SCP active HDMI cables

Active Chipset for the 30 ft Run

Active Chipset for the 30 ft Run

This is an active cable: the chipset sits in the display-side connector and boosts the signal before it reaches the display, and the cable is unidirectional from source to display. SCP's own range guide places 25, 30, 35 and 50 ft in the active category, while 3 to 15 ft lengths are passive and bidirectional. For an installer, this means the 9 m length can be specified without adding an external signal extender or a separate booster box. For the end user, the picture and sound from a source in another room or on the far side of a wall arrive without the extra equipment that would need power and its own maintenance. The connector marked Source must be used at the source device, and the Display connector at the TV or monitor, or the cable will not behave as designed.

In-Wall Rated Jacket for Concealed Runs

In-Wall Rated Jacket for Concealed Runs

The 28 AWG cable has a PVC jacket with a 7.5 mm outer diameter and is rated UL CL2 for in-wall installation, with a CL2 and FT4 flame rating and a UL and c(UL) product standard certification. Building codes and insurers often require a rated cable when it is run inside walls, ceilings or plenums, and an unrated HDMI cable in those spaces is a compliance problem. Using a rated cable lets the installer route the run through the wall without a separate conduit or a non-rated substitute. The end user gets a clean, hidden installation with no exposed cable, and the rating is printed on the product so a site inspector can verify it.

32-Channel Audio, ARC and CEC Control

32-Channel Audio, ARC and CEC Control

The cable supports 32 audio channels up to 11.2 surround, Audio Return Channel, HDMI Ethernet Channel and CEC, and the datasheet lists DTS-HD Master Audio, Dolby TrueHD, Dolby Digital Plus, and Dolby Digital and DTS formats. ARC lets a TV send audio back to a soundbar or receiver over the same HDMI cable, so a single cable covers both picture and sound return. CEC allows the source and display to share basic power and remote commands. For the end user, this means one cable to a TV can carry the full audio chain and the television remote can control the connected source without a second wire.

General9 specifications
Product typeActive HDMI cable
Cable typeActive (chipset), unidirectional
ApplicationIn-wall installation, source-to-display AV connections
Cable length9 m (30 ft)
ColourBlack
Cable length tolerance±100 mm
ManufacturerStructured Cable Products Inc. (SCP)
Part number944E-30
Series944E Custom Install Series
Connectors10 specifications
Connector 1HDMI Type A male, Snug-Tite, gold plated (Source side)
Connector 2HDMI Type A male, Snug-Tite, gold plated, with chipset (Display side)
Connector 1 genderMale
Connector 2 genderMale
Connector plating24K gold plated
Connector capTransparent plastic
Connector end labellingSource / Display
Connector gripSnug-Tite grip
Connector moulding materialPVC, black
Grip retention force12 lbs
Conductor1 specification
Conductor size28 AWG
Signal & performance22 specifications
Cable standardHDMI High Speed with Ethernet
Bandwidth18 Gbps
Maximum resolution4096 x 2160 @ 60 Hz 4:4:4
HDCP2.2
3D supportYes
Audio channels32
Audio Return Channel (ARC)Yes
Backward compatible with previous HDMI versionsYes
Blu-ray supportYes
CEC supportYes
Colour space supportBT.2020
Dual video streamsYes
HDMI cable categoryHigh Speed with Ethernet
HDMI Ethernet ChannelYes
HDR supportYes
Maximum clock rate600 MHz
Supported aspect ratio21:9 included
Supported audio formatsDTS-HD Master Audio, Dolby TrueHD, Dolby Digital Plus, Dolby Digital & DTS
Supported bandwidth tiers4.95 / 10.2 / 18 Gbps
Supported clock rates165 / 340 / 600 MHz
Supported video format (4:2:0)4096 x 2160p @ 60 Hz 4:2:0
Surround sound11.2 (32-channel audio)
Jacket & construction3 specifications
ShieldingShielded
Jacket materialPVC
Outer diameter7.5 mm
Fire rating & certificates4 specifications
Flame testCL2 & FT4
In-wall ratingUL CL2 in-wall rated
In-wall ratedYes
Product standard certificationUL & c(UL)
Operating conditions1 specification
Rated temperature23.89 Celsius (75 Fahrenheit)
Packaging5 specifications
Packaging typePrinted bag
Box dimensions450 x 260 x 405 mm
EAN810070019426
Quantity per pack1 (1 EA per box)
Units per carton16 pcs
Other features2 specifications
Warranty1 year (SCP-branded active HDMI cables)
Cable directionalityUnidirectional (Source to Display)

Specifications are checked against the manufacturer's documentation where available.