EU/UK HDBaseT 3.0 wall plate with HDMI and USB-C
PlexusAV P-AVN-WP301H-EU/UK-B
The PlexusAV P-AVN-WP301H wall plate is an in-room connection point for meeting rooms, classrooms and presentation spaces where people bring their own laptops, tablets and phones. It is built into a Decora-style plate with a full-size HDMI input and a USB-C input, and it sends the selected source over a single HDBaseT 3.0 cable to a PlexusAV P-AVN-3-HDBT IPMX gateway transceiver or another compatible HDBaseT 3.0 receiver. The main benefit for the end user is a simple plug-and-present workflow: the room picks up the active source automatically, and the USB-C port can charge a laptop while it is connected. The EU/UK-B version covered here is the black front-plate variant for standard EU/UK dual-gang boxes.

Uncompressed 4K60 Video Over One HDBaseT Cable
The wall plate transmits HDMI or USB-C sources as uncompressed 4K60 video with embedded audio over HDBaseT 3.0, rather than compressing the picture before it leaves the room. The manufacturer describes 4:4:4 sampling and zero added latency. For the end user this means presented slides, spreadsheets and video playback keep their sharpness and colour detail, and the image follows the presenter's input without a visible lag. Because the signal runs over a single HDBaseT cable to the receiver, the installer avoids a separate HDMI run per room. The 4K60 output depends on the receiver end being an HDBaseT 3.0 device such as the P-AVN-3-HDBT, and the supported input list in the datasheet includes some formats marked as upcoming, so the plate should be specified and tested against the actual laptops and sources the room will see.

60 W Laptop Charging and Network Pass-Through
With the included 24 V DC supply the USB-C input delivers up to 60 W of charging, and the laptop can reach the network through Ethernet pass-through on the P-AVN-3-HDBT transceiver. A presenter can connect once and have the laptop stay powered and online for the whole meeting, without a second cable running to the table. The trade-off is in the design: charging needs the supply and a mains outlet at the wall box, and when the plate is powered remotely from the transceiver the USB-C charging is disabled. Planning the power source per room therefore decides whether the plate can charge devices at all, and it should be settled before the cabling is installed.
One cable. Uncompressed 4K60. 60 W charging at the table.
Fits standard EU/UK dual-gang boxes · 3-year limited warranty

Automatic Source Switching With Locking Connectors
The plate has one full-size HDMI input and one USB-C input, each with a locking connector and a status LED. It detects the active source automatically and offers a push button for manual selection. For users who arrive with a mix of HDMI laptops and USB-C devices, this removes the need to pick an input or ask for help, which reduces support calls in busy rooms. The locking connectors keep a cable from being knocked out during a presentation, which is the failure users notice most. The front LEDs show which source is active and whether the input has a signal, so users can see where a problem sits without a technician.

Quiet, Wide-Range Operation for Fixed Installs
The plate uses active cooling, rated at 33 dBA in normal operation, so it stays unobtrusive in quiet meeting rooms and classrooms. The rated operating range runs from -25 to 45 °C, which covers typical wall-box conditions in offices and teaching spaces. Its 147 × 86 × 41 mm body is sized for a standard EU/UK dual-gang box, which makes it a straightforward replacement or retrofit for an existing wall plate. The manufacturer gives a 3-year limited warranty, which gives the end customer a defined support period for a permanently installed device.