Portrait 3x1 menu board wall mount for large screens
Chief LWM3X1UP
The Chief LWM3X1UP is a wall-mounted menu board mount that carries three displays in a portrait 3x1 layout. It is aimed at commercial menu boards in restaurants, cafés and retail environments that run vertical digital content. All three screens hang from one horizontal extrusion, which keeps them aligned, and the mount offers tool-free screen engagement with optional padlock security. It is built for indoor installations where the wall, the structure and the display weight have been checked in advance. For integrators, it provides a clean, serviceable menu board solution without a custom bracket build.

Three Screens Aligned on Uneven Walls
One horizontal extrusion carries all three displays, so the screens stay on a common line even when the wall is not perfectly flat. Depth can be set across roughly 2,5 cm to bring the whole array to an even distance from the wall, and the ControlZone micro-height adjustment fine-tunes vertical position by about ±2,5 cm. This helps an installer square up the board on a wall that is not flat, although the leveling roll still depends on wall-upright spacing. For the end user, the menu panels read as one straight board, and the open space behind the displays lets staff reach cabling and media players for servicing without dismantling the whole assembly.

Tool-Free Engagement and Padlock Security
Each display engages its interface bracket on the rail without tools, so screens can be seated and removed during installation or later service visits. Optional padlocks can be fitted to each bracket to secure a display to the board, which matters where a screen sits in a public area and could otherwise be lifted off or tampered with. Padlocks are not included. For the end user this means quicker access for maintenance staff and a lower risk of a menu screen being removed, while the locking option stays optional for sites that do not need it.
One rail. Three screens. Micro-height leveling.
UL listed · 56,7 kg per display · 10-year limited warranty

Portrait 3x1 Layout for Vertical Menus
This model is a portrait, three-wide configuration: three vertical panels side by side, designed for displays in the 101,6–139,7 cm class. Tall panels suit menus that list a full column of items, which is why the portrait 3x1 arrangement is common in quick-service and café settings. Because the mount accepts displays in a defined size range, the screen dimensions must be checked before ordering. For the end user the result is an evenly spaced, consistent menu wall that reads well from the counter.

Universal Pattern and Rated Load Capacity
The solution type is universal: the mount accepts mounting pattern widths from 100 to 800 mm, so the display's VESA pattern should be checked before ordering. The 800 mm adapter is included with this model, and the installation manual calls for an additional interface adapter kit for patterns above 400 mm. Load is rated at 56,7 kg per display and 170,1 kg for the mount as a whole. These ratings set the limits for the panels, and staying within them keeps the rail and interface brackets inside their design envelope.

Tilt Locked at Three Preset Angles
Each interface bracket tilts from 0° to -20° and can be locked at 0°, 10° and 20°, which lets an installer set every display to a repeatable angle. For menu boards mounted around or above eye level, a slight downward tilt helps the content face the viewer, and the locking points keep that angle fixed after cleaning or servicing. Because tilt is set per bracket, the three panels can be matched individually. For the end user this means the menu stays legible from the customer's standing position over time.

Wall Structure and Indoor-Only Requirements
The manual specifies standard wood studs at 40,6 cm on center or a bare 20,3 cm concrete wall, with outside wall uprights spaced between 101,6 and 152,4 cm apart and the end offset not exceeding 35,6 cm. The installer must confirm that the structure can carry five times the combined weight of the equipment, and the product must not be used outdoors. For the reseller this is a pre-sale checkpoint: confirm wall type and structure before quoting. For the end user, a correctly reinforced wall is what keeps three panels stable through the warranty period, since the manufacturer's warranty excludes improper installation.