Origin Acoustics OS60DTW

The Origin Acoustics OS60DTW is a 6.5-inch outdoor surface-mount loudspeaker from the Outdoor Collection, built for residential and light-commercial installations where weather resistance and high-quality sound must coexist. Finished in white, it pairs a 6.5-inch IMPP woofer with dual 1-inch aluminum tweeters for a wider and more even high-frequency dispersion than a single-tweeter design. Its pivoting bracket lets installers orient the speaker vertically or horizontally and then aim it precisely at the listening area, making it equally at home on a patio wall, covered pergola, or commercial terrace. With IPX4 weather resistance and a rugged enclosure, the OS60DTW is engineered to stay in service season after season without requiring service calls.

Dual 1" Aluminum Tweeters for Better Coverage

Where a standard single-tweeter outdoor speaker tends to beam high frequencies in a narrow zone, the OS60DTW uses two separate 1-inch aluminum tweeters spaced apart in the same cabinet. This gives the speaker a nominal coverage angle of 100° horizontal by 50° vertical — substantially wider than typical single-tweeter designs. In practical terms, this means a single speaker can cover a larger seating area without hot spots directly in front and dead zones at the edges. Aluminum tweeters also maintain accurate, detailed treble reproduction at outdoor listening levels, where ambient noise can otherwise mask fine detail. For pool decks, covered patios, or restaurant terraces where listener positions vary, this is a genuine advantage over single-tweeter alternatives in the same size class.

IPX4 Weatherproof Enclosure — Season-Ready

The OS60DTW carries an IPX4 weather-resistance rating, meaning the enclosure is protected against water splashing from any direction — rain, sprinkler overspray, and coastal humidity included. The woofer cone is made from IMPP (Injected Molded Polypropylene), a material chosen specifically for its dimensional stability when exposed to temperature swings and moisture. For an outdoor speaker that stays mounted year-round without seasonal removal, this combination of cabinet and driver material significantly reduces the risk of cone delamination, voice-coil corrosion, and grille discolouration over time. Installations in climates with heavy rainfall, poolside environments, or near irrigation systems will benefit most from this level of protection.

Dual tweeters. Wide dispersion. Built for the outdoors.

IPX4 weatherproof · Limited warranty via authorized dealer

Pivoting Bracket for Flexible Aim and Orientation

The OS60DTW ships with a dedicated wall bracket that allows the speaker to be mounted either vertically (tweeter at top) or horizontally (tweeter to the outside), and then pivoted to point directly at the primary listening zone. Loosening the top and bottom knobs lets the installer swing the cabinet to virtually any angle, then lock it in place. This matters in real installations where the ideal mounting surface — a fascia board, soffit, or wall — is rarely in the perfect geometric position relative to where people sit. Being able to decouple the speaker's aim from its mounting point removes the need for custom bracket fabrication or compromise on placement, and makes fine-tuning after handover straightforward for the end user.

Single-Speaker Stereo — Simplifies Wiring

The OS60DTW is designed as a single-enclosure stereo speaker, meaning both left and right channels are handled by one unit. This halves the number of cable runs, brackets, and mounting holes compared to a conventional stereo pair. In outdoor installs where running cable through walls or under decking is time-consuming and disruptive, this is a practical advantage: one cable drop, one mounting location, and the listener still hears a left-right soundstage. It also means a single speaker can fill a covered patio or small terrace without requiring a second unit on the opposite wall, keeping the install tidy and cost-effective for the end customer.